What's New & Exciting ?

About PCS Products Services Contacts What's New Information
Careers Price List Index Vendor Partners Training Promotions  

 

 

KD-X400ProK Ultra HD/4K HDMI Extender Kit

 

 

 

 

KD-X400ProK Brochure Link

KD-X400ProK Ultra HD/4K HDMI Extender

HDBaseT/HDMI via Single CAT5e/6 (Tx + Rx Set) Extenders, support Ultra HD/4K, EDID Control, Hot Plug Control, Full Buffer System, IR Sensor, Up/Down IR & RS-232

  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • Signal Extension:
    » Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
    » Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6 UTP/STP cabling
    » Up to 250 ft. @ 1080p / 1920x1200 using KD-CAT6STP1X cabling
    » Up to 230 ft. @ 1080p / 1920x1200 using third-party CAT5e/6 UTP/STP
  • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on 3.5mm connector
  • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
  • 3D: Support for standard 3D stereoscopic signal formats
  • Deep Color Support: 12bit Deep Color video / 8bit color for 4K/UHD
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™
  • CEC Support: For inter-device control between main input and output HDMI channel
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.

Discover the Possibilities TM

Compass Control® represents the first fully integrated major control system built from the ground up to use Apple's iOS devices – iPad®, iPad mini®, iPhone®, and iPod touch®as its backbone.

Compass Navigator Test Drive Video

With the power of iOS and the Compass Control® App for the iPad®, iPad mini®,iPhone®, and iPod® touch, control for your dream system has become a reality thanks to simple swipe gestures and the simplicity of Compass Control’s beautiful graphic interface. Using Key Digital’s Compass Navigator™ software, programming a Compass Control® device is an intuitive step by step process utilizing simple ‘drag and drop’ gestures.

Android Coming Soon!

Compass Control Residential
Compass Control Commercial

Need to convert a conventional Speaker into a Stereo Speaker?

 

CiTR-SM Stereo to Mono Adapter

Situations often arise in multi room music distribution system in which there is only enough space to locate a single speaker. This usually happens in smaller rooms such as bathrooms where the ceiling space is limited either because of the inherently small size of the room, or much of the available space is taken up for lights and air vents. Using a conventional in ceiling speaker in this circumstance would yield compromised playback of only the left or right channel of the stereo signal, which is less than mono. Half of the music. Not good. The clever engineers at KEF have created an intelligent solution to overcome this all too common problem. The new CiTR-SM

• The CiTR-SM takes the separate left and right channels from the output of a stereo amplifier and combines them so they will playback into virtually any single speaker, with no compromise to the electronics, speaker or musical signal.

• With the CiTR-SM an installer is not limited to using an in-ceiling speaker for this application; they can choose ANY form factor - be it in-ceiling, in-wall, outdoor, on-wall, bookshelf or floor standing. Limitless choice.

• Should you choose to run the left and right speaker wires to the speakers, the CiTR-SM could be located behind the speaker. If the CiTR-SM is located at the electronics, time and money are saved because only a single speaker wire needs be connected from the CiTR-SM to the speaker.

CiTR-SM Brochure Link

Universal TV Media Box Mounting Kit


 

New from Calrad

Universal TV Media Box Mounting Kit

Works with Apple TV, Roku, Fire TV and most media boxes

Calrad 47-130 Brochure Link

LED Lighting & Accessories


 

New from Calrad

LED Lighting & Accessories

The uses of LED lighting around the home are endless. Lighting gives life to a room. It can set the mood, accent a favorite piece of art, or add a splash of color in an unexpected place.

Our indoor/outdoor LED strip lights can be used almost anywhere in your home with a low voltage power transformer. Our LED Modules are simple to use for many applications and our LED fixtures are great for outdoor lighting accents.

LED Brochure Link

 




 

1X2 HDMI Distribution Amplifier with Digital/Analog Audio Extractor

1X2 HDMI AMP w/Audio Extractor

The Calrad 40-HDMI-EXT HDMI is designed to extract HDMI audio from HDMI signals.Decodes audio to analog 2- channel stereo or to Toslink digital S/PDIF providing multichannel audio up to 5.1.

Perfect for Apple TV, Google Chromecast, Xbox One, PS4, Sonos Speaker systems or other HDMI sources, providing a simple method to extract audio from HDMI sources and deliver it to a multi-zone audio system or to a AV receiver without the need of connecting to a TV/Display to hear the audio. Decode audio without HDMI-1, HDMI-2 outputs connected to displays. Built-In 2 Port HDMI splitter.

Specifications

  • HDMI Input Video Resolution: Up to 1080P/60Hz, supports 3D (24/30fps)

  • HDMI Output: 2 x HDMI Ports

  • EDID Management: Supports 3 modes of EDID management for audio formats,

  • Can switch among built-in EDID (2/5.1CH) and external EDID (TV)

  • HDMI Signal L.E.D.’s: 2 x Green L.E.D.’s when signal is connected

  • Audio Output: Supports SPDIF digital audio format: Dolby digital (AC3), DTS, LPCM, and support 5.1CH, 24-bit/192kHz DAC

  • L.E.D. Indicators: 1 x Power (Red), 2 x HDMI Signal (Green)

  • Power Supply: 5V DC/1A power adapter

40-HDMI-EXT Brochure Link




New Model Release!

Hi-Quality Compact CD Player

 

Marantz HD-CD1 Compact CD Player

The HD-CD1 is a high-quality CD player in the same compact form as the HD-AMP1 amplifier, for which it is the perfect match. Combining more than 30 years of Marantz expertise in compact disc playback with the latest developments in digital audio technology, it’s ideal for use as a CD transport when used with the HD-AMP1, or as a CD player in any situation where a compact form-factor is required without any compromise on sound quality.

Small it may be, but it makes use of state-of-the-art Marantz technology carried over from our Award-winning CD players, including a high-resolution 192kHz/24-bit digital-to-analog converter from Cirrus Logic, a high-accuracy system clock, and the famous Marantz HDAM-SA2 amplifier modules, as found in our flagship Reference Series CD players and amplifiers.

HD-CD1 Brochure Link


Clearview Innovations Window TV


 

Clearview Innovations Window TV

The Window TV is described as a translucent HD display built into a fixed triple-pane window. Users can press a button to display the TV image, or press the button again to return to a clear window view.

Window TVs are said to be based on OLED technology, and are expected to be available in screen sizes of 22, 32, 42, 50, 55, 65 and 82 inches, with matching window size. Units will be "fully wired and ready for install," and will include a remote input box on a 50-foot line. Video connection is via USB, VGA or HDMI. Both HD and 4K options are said to be available.

ClearView adds that it is in the process of creating a screen-flip option, that would reverse the image and make it correctly viewable from an outside patio.

"For years we've made TVs disappear by turning into Mirrors," said Brian Walter, President of ClearView. "Now our Window TV simply disappears. The addition of a ClearView HiddenReflections Window TV will instantly improve the status of any residential or commercial property."

HiddenReflections Window TVs are scheduled to ship in 6 months.




New From Platinum Tools

Net Chaser™ Ethernet Speed Certifier & Network Tester

 

Net Chaser™ Ethernet Speed Certifier & Network Tester

The Net Chaser™ Ethernet Speed Certifier offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cable wiring, and ensuring that cables are able to support the speed capabilities of active equipment. • Speed Certification to IEEE standards 802.3 • Cable testing to TIA 568A/B The NetChaser’s advanced discovery gives the clearest vision of network layout and interfaces between active components like servers, switches, routers, etc. Saves test reports and exports to PC’s in PDF or CSV format. • Pings specific IPs or URL addresses • DHCP • Traceroute • VLAN

Includes:
• Net Chaser™ main unit
• Active remote
• Power supply (2) (NA/EU/AU/UK)
• 4 GB SD card
• Micro USB
• Network patch cable (2)
• RJ45 Port Saver (2)
• Hanging strap and clip (2)
• Large carrying case
• F-Connector (F81)
• User Manual

Net Chaser TNC950-AR Video Link

Net Chaser TNC950-AR Brochure Link

      

 

Plenum Cable in Stock

 

    

National Building Code of Canada

Fire Protection: Minimum Fire Rating of Cables in Air Plenums
The minimum rating increases for optical fibre cables and electrical wires and cables used for the transmission of voice, sound or data installed in a plenum. It is now consistent with optical fibre cables and electrical wires and cables in both combustible and noncombustible construction.

What is a Plenum Space?
A plenum is defined as any space used as part of an air-handling system. This includes heating/air-conditioning ducts and air returns, which frequently include the space between suspended ceilings and the floor above in modern office buildings. The National Electric Code (NEC) requires that "exposed cables (those not in conduit) in plenums be listed as having adequate fire-resistant and low-smoke producing characteristics ..."

In-Stock Plenum Cables include;

  • Speaker Wire
  • UTP/STP Cat5E/6
  • RG59, RG6 Coaxial Cable
  • CrestNet & Lutron Cables
  • 22-4C Alarm Wire
  • 18-2C Solid LVT
  • Shielded and Unshielded Electronic Cables

Décor Brush Plate

 

Midlite Décor Brush Plate

The Midlite Décor Brush Insert offers installers a clean, on wall cable management pass through device. The Wire Brush Insert is supplied with the Décor Plate and screw hardware. For jobs requiring many wires, you can multi-gang the Décor Brush Plate Insert and still offer a clean custom look. Décor Brush Inserts are availabe in White or Black and can be paired with any color trim plate to complete your installation. With our limited Lifetime Warranty you are assured years of superior trouble free installation.

Midlite Brush Plate Brochure Link

USB ChargerDevices.

Smart, Fast,Convenient

USB Charger Devices

Charge Multiple Devices

The Leviton line of USB Charger Devices offers powerful charging capabilities to get your electronic devices up and running fast!

Our USB Charger Devices feature a smart chip that recognizes and optimizes the charging power of your electronic devices for fastand efficient charging. Strategically placed vertical USB Ports in all models providegenerous room to insert and maneuvercharging cords and add to the contemporary and aesthetically appealing design. Plus,adapter-free charging eliminates unsightly clutter contributing to a neat appearance on countertops, desktops or wherever you chooseto charge.

Available with outlet or without, Leviton USB Charger Devices are a powerful solution tohelp keep you connected to all your favorite mobile devices.

More Power to Keep You Connected!

Leviton USB ChargerDevices Brochure Link

 

SmartMountXT Flat Panel Cart for 32"-75" Displays

Peerless SR560M Flat Panel Cart Brochure Link

SmartMountXT Flat Panel Cart

The SR560M SmartMount® Flat Panel Cart has been redesigned to include all of the features you may need, making it perfect for any application. Mobility, appealing design, display height adjustment and a pre-assembled base ensure quick assembly, while providing a rigid, but attractive structure that fits into any décor. The 4" castors make it easy to move from room to room while the UL® certification ensures you that it can be done with safety in mind.

XtremeTM Outdoor Soundbar In Stock!

 

SPK-060 Powered Xtreme Outdoor Sound Bar

Immerse yourself in outdoor entertainment at its finest with the market’s first amplified outdoor soundbar by Peerless-AV®.

Whether there’s rain, snow, ice or heat, the Xtreme™ Outdoor Sound Bar stands up to the toughest elements brought on by Mother Nature. With features such as Bluetooth® compatibility and full range audio (50Hz - 20kHz), your outdoor entertainment experience gets an upgrade.

Additional Features:

  • Built-in Class D amplifier outputs 180W total system power

  • IP65 rated aluminum enclosure features rubber gaskets at every seam that completely seal, isolate and protect the soundbar’s electronics from the outside environment

  • High quality drivers provide great sounding full range audio (50Hz - 20kHz)

  • Control the power level, tone, and input selection with the 12 button IR remote control

  • Easily mounts to the Peerless-AV® XtremeTM line of weatherproof displays

SPK-060 Brochure Link


 

4 X 4 Video Wall Processor supports Seamless Matrix Switching

 

 

4 X 4 Video Wall Processor supports Seamless Matrix Switching

Key Features

  • HDMI Matrix Switching: 4 HDMI/Analog sources to 4 HDMI outputs, independent when in matrix mode
  • Seamless Switching: Un-interrupted screen transitions during source selections
  • Video Wall Processing: Transform consumer and professional displays into a video wall with eight video wall modes
  • Horizontal (4): 1x4 Rotated, 1x4, 1x3, and two sets of 1x2 -Vertical (3): 4x1, 3x1, and two sets of 2x1  - 2x2
  • Bezel Control: Create a fluid screen transition by removing pixels from top, bottom, left, and right border independently › EDID: Internal library with 5 default EDID configurations for each input, in addition to native EDID data for any Output/Display
  • Full Buffer™ Technology: Full buffering of HDCP and EDID, for the fastest possible switching and viewing of any source/input to any display/output, regardless of multiple output viewing relation › TMDS re-clocking: Support for long HDBaseT/CAT5e/6 or HDMI connections and many layers of connectivity.
  • Deep Color Support: Up to 12 bits/color › Control: Front panel buttons, Serial IR, Optical IR, RS-232, and TCP-IP, including video wall mode select, matrix switching, EDID Control and discrete on and off via IR
  • Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton®, etc.

Specifications

  • Input (Each): 1 HDMI connector, Type A, 19 pin female; 1 HD analog video 15-pin female, 1 analog audio connector, 3.5mm stereo female » Output (Each): 1 HDMI connector, Type A, 19 pin female; 1 digital coaxial audio on RCA connector, female, follows SPDIF format IEC 60958
  • Power Supply: KD-PS12V3A, 12V/3A, 100-240VAC, 50-60Hz, NEMA 1-15P Cord
  • Rack Mount: 1U, full rack-width (rack ears included)
  • Accessories: Rack Ears
  • Product: 17.25” x 7.1” x 1.75; Weight: 6.5 lbs
  • Packaging: 22.8” x 8.5” x 3.2”; Weight 8 lbs
  • Regulation: CE, RoHS, WEEE
  • Enclosure: Black Metal

KD-VW4x4Pro Catalogue Page Link

KD-VW4x4Pro YouTube overview

 

MULTICHANNEL A/V PRE-AMPLIFIER
WITH WI-FI & BLUETOOTH

 

 

Marantz Pre-Amp Processor's

AV8802A

The Marantz AV8802A 11.2 channel A/V pre-amp/processor is packed with the latest audio and video technologies, all designed to provide you with the ultimate music and movie surround sound experience. Most remarkably, the AV8802A features breathtaking 3D-sound options, including Dolby Atmos® and Auro- 3D® (paid upgrade required), giving you the ability to add additional speakers for a truly expansive and immersive surround sound experience. The AV8802A further enhances audio quality by delicately handling all signals via the Marantz HDAMs in Current Feedback topology before being passed to the XLR outputs and separate power amp. The video section with full HDCP 2.2 support features advanced high resolution video processing and decoding, and is equipped with video upscaling that upconverts standard definition (SD) video sources from legacy components to high definition 4K/60Hz full-rate video.

AV7702mkII

The extremely versatile AV7702mkII, perfectly and expertly handles any kind of high resolution multichannel audio format. It also offers an extended network package including audio streaming, internet radio, Spotify Connect®, Pandora®, SiriusXM™, and AirPlay®. It even includes built-in Wi-Fi and Bluetooth® capabilities. Superb surround sound audio quality from the latest tone formats is guaranteed by the powerful 32-Bit SHARC DSP offering high channel separation that leaves no chance for any crosstalk. Tone formats include the latest decoding technologies Dolby Atmos, DTS:X (via future firmware update) and Auro-3D (optional paid upgrade) – which not only provide breath-taking surround sound but also open the door to 3D sound. The DSP is supported by high quality 192kHz /32 bit DAC. In addition, the 11.2 channel AV7702mkII further enhances audio quality by delicately handling all signals via Marantz’s own current feedback HDAMs preamp, before passing them to the high-quality 11.2 XLR or 13.2 RCA outputs and separate power amp. The AV7702mkII also takes supreme care of video signals via the eight HDMI 4k 60Hz pass-through / scaling inputs and sends them to the two HDMI output sockets or independently to the third HDMI output that is dedicated for multi-room. All of them support HDCP 2.2 copy protection for 4k UHD content.

 

JUMPER CABLE MANAGEMENT RINGS

Jumper Cable Management Rings

Features:

  • Manufactured from durable, rigid, fire retardant polymer.

  • Extremely light weight and easy to install.

Different Models: P119 - 2.0”, P120 - 3.5”, P121 - 1.25”

Color: Grey. Custom colors available

 

Low Profile IN-AND-OUT™ Covers for New or Existing Construction

 

 

Installation Video Link

 


Low Profile IN-AND-OUT Covers

Low profile when not in use and a deeper, weatherproof-in-use extraduty cover when cord is plugged in. Non-metallic cover and base. Comes in clear or textured/ paintable white. UV rated plastic for long outdoor life.

FEATURES AND BENEFITS

  • Low profile when not in use – weatherproof-while-in-use

  • IN position provides a sealed box to keep bugs out

  • Extends quickly and easily into the OUT position to accommodate a plug

  • Fits over all boxes or openings in new or existing projects

  • The 61 Series has an installed, oversized base for large openings or a 3.5” round outlet box

  • Installed gaskets

  • Install option: Cover is removable for easier device installation

  • Vertical and horizontal styles

KD4550 45° Knock-Out Entry Device

45° KD4550 installed in power and low voltage openings of Arlington’s two-gang TVBU505 box. Power side shown with LPCG50 strain relief connector in KD4550.

 


KD4550 45° Knock-Out Entry Device

Our new non-metallic KD4550 45° KO Entry Device provides a smooth, 45° angle for power or low voltage cable connectors installed with a decorator-style wall plate.

  • 1/2" KO at 45° for the installation of 1/2" trade size fittings

  • Can also be used as a cable entry device for low voltage cable

ICE Cable "Locking" HDMI Cables

ICE Cable "Locking" HDMI Cables

GRIP Lock Technology
Special springs on the HDMI plug provide a secure grip to the female connector. The result? Over 3x the strength found in conventional HDMI connectors, giving you the most stable connection possible. No screw hole. No push release.

Compact Head Design
At only 21mm long, our Series 2 cable is now 40% shorter than our previous model. We also reduced the width and made it thinner, giving you easier access in tight spaces.

1080p/60hz up to 100 Feet
Until now, our HDMI cables have been able to achieve 1080p/60Hz up to 50 feet. Active chipsets and advances in cable technology have allowed us to achieve 1080p/60Hz all the way out to 100 feet. This gives you a direct connection between your source and display, eliminating unnecessary connection points versus a standard balun setup.

The Perfect Tension
At 12lbs of pull force, the connector won’t come out with normal use. But if your TV falls off the wall, it will pull free, leaving your equipment undamaged. Other locking HDMI cables have way too much pull force, or even a screw, which can result in damage to your TV.

Eliminate Unnecessary Service Calls
There’s nothing worse than having to drive across town in traffic, only to find your client’s cable was unplugged. We understand, we live in Los Angeles. At only 3lbs of pull force, it doesn’t take much for regular HDMI cables to pull out of their connection and lose signal. With GRIP, it’s problem solved.

Want to experience Dolby ATMOS?

Our Calgary, Alberta demo Theater has just been outfitted with Dolby ATMOS in a 7.1.4 Configuration. Just give us a call to set up a time for you and or your client to experience completely immersive sound!


PCS appointed Canadian Distributor for BackBoxx

    


BackBoxx™

BackBoxx™ products make you more efficient, more profitable with your time, and more professional in appearance. 

Although many of our products are designed to help you meet local and national building codes, installers also use them for an insulation-free project, wire protection during construction and blocking of other trades from critical wiring areas. 

BackBoxx™ products are designed by custom installers who know that ease of installation means no hassles. Our products are simple to use and time-tested in thousands of applications each year.

Link to BackBoxx Price List



 

 

 

Boston A Series Speakers

Setting a new standard
for performance and value

Our design goal was to offer Boston’s legendary sound, exceptional quality, modern styling, and enduring value. Housed in stunning high-gloss scratch-resistant cabinets with contrasting textured finish and magnetic grilles, A Series loudspeakers look great in any room’s décor.

To deliver the best performance possible in this price class, Boston Acoustics engineers brought together the best elements of traditional loudspeaker design, incorporating several new technologies and some innovative thinking, to once again set the new standard for performance and value.

Smart Features Include:

• High-contrast finish with scratch-resistant high-gloss panels for stunning good looks

• Boston’s 1-inch Kortec® soft dome tweeter for crystalline high frequencies

• Advanced ceramic/glass fiber polymer woofers utilize Deep Channel® Design (DCD) to deliver more and cleaner bass response from less amplifier power

• Acoustically tuned ports for improved  low frequency response

• Easy hook-up 5-way gold-plated binding posts provide total hook-up flexibility and the purest signal transfer 

• Boston’s BassTrac® circuitry for  more bass without distortion  (Powered Subwoofers)

A Series Brochure

Small Subwoofers with Big Sound!

SUB6 and SUB8 Compact Subwoofers

Bass you can Feel.

sub6 is a sealed box, front-firing subwoofer offering 120W of powerful bass extension, perfect for music or home theater. A precise, low-pass filter makes sub8 a perfect match with any Kanto speaker, allowing you to dial in the perfect cut-off frequency. Its 6" paper cone driver enables true sub-bass reproduction with low-end that has real weight. Phase adjustment, power saving auto-off and full L/R line level input round out this high-performance package.
Dimensions 8.7" W x 8.7" D x 9.6" H

sub8 is a sealed box front-firing subwoofer offering 120W of powerful bass extension, perfect for music or home theater. A precise low-pass filter makes sub8 a perfect match with any Kanto speaker, allowing you to dial in the perfect cut-off frequency. Its 8" paper-cone driver enables true sub-bass reproduction with low-end that has real weight. Phase adjustment, power saving auto-off and full L/R line level input round out this high-performance package.
Dimensions 11” W x 11” D x 11.9” H

Kanto Audio Brochure Link

 

New From PCS


Trust the industry's largest provider of end-to-end wire & cable management and pathway innovations to get from point A to point B.

With the help of advanced technology and sophisticated manufacturing, Wiremold products work together seamlessly to save installation time, while providing enhanced flexibility and productivity in environments ranging from residential dwellings and educational institutions to meeting rooms and healthcare facilities.


 



 

HD-AMP1 DIGITAL INTEGRATED AMPLIFIER

 

HD-AMP1
DIGITAL INTEGRATED AMPLIFIER

Engineered to the highest Marantz purist audiophile standards, the HD-AMP1 digital integrated amplifier serves as the heart of your music system, and features the latest digital audio technologies that extract the utmost fidelity from the widest range of audio sources. Equipped with multiple digital inputs, including 2 optical, 1 coaxial along with 2 USB ports, the HD-AMP1 features the ability to decode the latest generation lossless high resolution audio file types, including WAV, AIFF, ALAC, FLAC at up to 24-bit/192-kHz resolution, along with the ability to play MP3, WMA and AAC tracks. The rear panel USB-B port features advanced noise isolation so you can connect your PC or Mac and stream even higher resolution files, up to 32-bit/384-kHz. The HD-AMP1 is equipped with the reference grade ESS SABRE DAC and dual master clock crystals for the widest bandwidth, highest dynamic range and lowest distortion, and the HD-AMP1 can also play your favorite DSD hi-res audio tracks including 2.6/5.2/11.2-MHz.

HD-AMP1 Brochure Link

MP70 HD Network Ready Digital Signage Player

 

MP70 HD Network ready Signage Player

The MP70 is a simple, yet powerful, network digital signage appliance that provides the flexibility and reach needed for intricate digital signage systems, while keeping cost minimal. The MP70 is an essential component for digital signage systems needing network capability without having all the bells and whistles unnecessarily added onto appliances in this class.

MP70 Brochure Link

2015 Catalogue now available!

Fuzzy Cable Management Products

Rip-Tie® cable wraps and ties have become a standard in reusable cable management and organization. Rip-Tie® Inc is an authorized wholesale distributor of VELCRO® brand Hook & Loop materials.

Link to RIPTIE 2015 Catalogue


 

Digital Signage Solution for Games Rooms, Bars and Restaurants

 

 

Watch the Presentation Video

KD-MLV4X2 MultiView Matrix Switcher with Compass Control

Create an amazing Digital Signage Solution with the KD-MLV4X2 MultiView Matrix Switch and Compass Control.

HDMI Matrix Switching: 4 HDMI/Analog sources to 2 HDMI outputs, independent in full-screen and quadrant modes.

Seamless Switching:
Un-interrupted screen transitions during source selections in full-screen mode or multi-view modes.

Resolution Support:
Supports SD, HD, and VESA input resolutions up to 1080p / 1920x1200 on HDMI and analog video Inputs.

Analog to Digital Video Conversion:
Analog video input ports support VGA / DB15 or Component / YPbPr signal types.

Ultra HD/4K Up-scaling:
Outputs independently upscale to Ultra HD/4K in 4K Quadrant mode.

Multi-View Window Processing:
Create & store custom multi-view layouts, recall custom presets in 1080p (2K) Multi-View mode Quadrant Mode (4K or 2K): Independent outputs in four equally-sized windows Multi-View Mode (2K): Linked/mirrored outputs in customized screen layout.

Image Layering:
Stack images with customizable priority settings.

Window Transparency and Border:
View content through each other and choose window bezel width and coloring Web.

Control Interface:
Reduces installation time and provides basic and advanced video and audio setup.

Audio De-Embed:
Audio from the selected input is be de-embedded through the Coax digital (PCM) output in addition to the HDMI output.

Independent Video & Audio Matrixing:
Listen to any audio source while in quadrant or multi-view modes.

Full Buffer System™:
Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake.

EDID:
Internal library with 5 default EDID configurations for input, in addition to native EDID data for any Output / Display.

TMDS re-clocking:
Support for long HDMI connectivity using Key Digital® HDMI cables.

Deep Color Support:
Up to 12 bits/color.

Licensing:
Fully licensed and compatible with HDMI up to 4KUHD/60Fps and HDCP 1.0 to HDCP 1.4 technologies. For HDCP 2.2 sources use KD-HDFIX22 in conjunction with this product.

Control:
Front panel buttons, Serial IR, Optical IR, RS-232,
TCP-IP and Web Control, including discrete power ON/OFF via IR, RS-232, and TCP-IP.

Control System Support:
Compass Control®, AMX®, Control4®, Crestron®, KNX®,RTI®, Savant, URC®, Honeywell®, HAI®, Leviton®, etc.

KD-MLV4X2 Brochure Link

Compass Control Brochure Link


 

Resolve HDMI Integration issues!

KD-HDFIX22

 


 

 

Watch the Presentation Video

KD-HDFIX22
 
HDMI Extender, Booster & Buffer of EDID with built-in Audio De-Embedder of Digital Coaxial & Analog L/R, supports HDCP 2.2, TMDS, HPD, Ultra HD/4K
  • Extending: Capable of extending UHD/4K and 1080p resolution up to 75 ft. / 23 m. in and 75 ft. / 23 m. out (150 ft. / 46 m. total)

  • HDMI Correction: Resolves common HDMI integration obstacles such as HDCP, EDID, HPD, and audio breakout

  • Resolution Support: Supports all SD, HD, and VESA resolutions up to Ultra HD/4K, 3D and 1080p/60 (60Hz & 50Hz)

  • 4K/Ultra HD: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4 or 60Hz at 4:2:0.

  • HDCP 2.2: Compliancy up to HDCP 2.2

  • 3D Ready: Capability to pass 3D stereoscopic signal formats

  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake

  • Audio De-Embedding: Audio from the HDMI input is de-embedded through the Coax digital (PCM) and/or Analog L/R audio output

  • Auto-EQ: Precise signal equalization applied to input and output signals automatically delivers best possible picture quality

  • EDID Control: 15 internal EDID tables or EDID copy room output/display

  • Forced HPD: Enables integrator to choose if active signal voltage is forced to connected input device

  • Licensing: Fully licensed and compatible with all HDMI and HDCP technologies

  • I2C Communication: EDID and HDCP authentication to Display and Source

  • RS-232 Controllable: Control of unit and connectivity status

  • CEC Support: For inter-device control between main input and output HDMI channel

  • Deep Color Support: Up to 16 bits/color at 1080p/60


Kanto Living Furniture Solutions...NEW from PCS

OASIS 68 PLUS
TV Stand with Built-in Mount

OASIS Plus maintains the elegance of the standard model while providing improved functionality. With the addition of a tilt and swivel mount capable of holding up to an 80″ TV, OASIS Plus allows you to position your TV for optimal viewing. With three tempered black glass shelves capable of holding a combined weight of 260 pounds, OASIS Plus provides ample space to store your AV equipment. Simple assembly and handy cable management ensure a quick and professional looking home installation. Choose between 50" or 68" models and English Chestnut or Satin Black finishes to best suit your living space.

 
  • TV Size 37" - 80"
  • Max TV Mount Weight 130 lbs (57 kg)
  • Supports VESA 100×100 - 700×400
  • Max Weight 260 pounds over 3 shelves

Kanto Living Furniture Brochure Link

Wall Mounted Pull Out & Swivel

Wall Mounted Pull Out & Swivel Automated Flat Panel Mount

The beauty and utility of a wall mounted flat-screen TV is even more enhanced with the INCA fully automatic and remote controlled, near silent, Wall Mount system. At the press of a button, you can bring your TV out of the wall and rotate it to the most desired viewing position. With the touch of a button, you can also initiate automatic commands that reverse motions, from any position, to bring the flat-screen TV back to the wall.

These systems are fast and easy to install. They are designed for up to a 65” flat panel TV weighing less than 75 pounds.

Features include the following:

• Includes a two-button radio remote or dry contact controller

• Completely assembled in wall mounting frame

• Cable management system

• VESA rated mounting system

• Limited 2 year manufacturer’s warranty

• Fast and easy installation

• Near silent operation

AirCharge Wireless Charging Grommet

 

AirCharge Wireless Charging Grommet

The AirCharge solution enables users to power and charge their devices without the hassle of messy cords or cables. Designed to be easily installed in table surfaces, the sleek grommet fits into any standard 80 mm (approx. 3") opening and can be integrated into a variety of spaces offering a convenient way to charge any Qi compatible smartphone or device without the need to carry charging cables or find an available power outlet. A steel mounting plate and screws are included allowing customers the option to secure the grommet in place.

Devices not equipped with the Qi technology, can be adapted to accept a charge from the AirCharge unit by simply placing the AirCharge Wireless Receiver on the grommet and connecting a device to the Wireless Receiver using the connections provided.

AirCharge Brochure Link

Flexo F6 Flexible, Semi-Rigid Wrappable Split Tube

 

 

Flexible, Semi-Rigid Wrappable Split Braid Tube

FLEXO F6’s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (Velcro, tape, etc.). The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices.

F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses. Allows for addition or removal of wires without disassembly.

  • Easy, Cost Effective Installation

  • More Flexible than Split Convoluted or Spiral Wrap

  • 25% Edge Overlap

  • Cut and Abrasion Resistant

  • Halogen Free

  • Retains Shape & Rigidity Throughout -94°F to 257°F Temp. Range

  • Melt Temp 482°F

F6 Brochure Link

 

 

Introducing the HEOS Drive




 

The Details
For maximum flexibility, the line level outputs are configurable. In their out-of-box state, they are full bandwidth and variable, allowing a zone to be used in conjunction with an external power amplifier if needed. In this application, the 12-volt trigger output typically can be used to provide a turn-on signal to the connected power amplifier. Alternatively, these outputs can set to fixed if being used in conjunction with an amplifier with its own volume control. Beyond that, the line-level outputs can be set to insert a high-pass filter with selectable crossover frequencies. In any setting, the line-level outputs are set to stereo in their out-of-box state. However, for most distributed audio applications, they can be switched to mono, allowing for both the left and right channels to play out of either speaker.

The left line level output can be configured as a subwoofer output with selectable low-pass filter frequencies. This would allow the use of the HEOS App to remotely choose the crossover frequency for the subwoofer rather than setting it on the subwoofer itself. In this application, the LFE input of the subwoofer should be used rather than its line-level inputs, thereby bypassing the subwoofer’s internal crossover.

The speaker-level outputs match the settings of the line-level outputs as either full-range or high-pass. As is the case with the line-level outputs, high-pass crossover frequencies can be set using the latest version of the HEOS App.

The HEOS Drive will be controllable by all the same 3rd-party control solutions as the rest of the HEOS family of products. Please check with your preferred vendors for driver availability.

The HEOS Amp and HEOS Link have already developed a reputation as offering best-in-class sound quality, build quality, flexibility and output in the case of the Amp. From their Burr-Brown DACs and ELNA capacitors to their dual-layer chassis, the HEOS Amp and Link have set themselves apart from all other wireless multi-room audio amplifiers and preamplifiers. However, when an installation calls for more than two channels of amplification, multiple HEOS Amps must be used, and they are too wide to fit side-by-side on a rack mount shelf.

Enter the NEW HEOS Drive. Offering a combination of performance and configurability that is unprecedented and unequaled, the HEOS Drive will quickly become a "go to" product for complex, multi-room distributed audio installations using passive loudspeakers.

The Basics
The HEOS Drive is a 2U (with feet removed), rack-mountable, 8-channel, 4-zone HEOS amplifier and preamplifier. Each channel is rated at 70 watts into 8 ohms, 20Hz-20kHz at less than .1% THD. Two or four channels of the Drive can be bridged, allowing it to be reconfigured as a 6- or 4-channel amplifier. In bridged mode, the Drive is rated to deliver in excess of 100 watts per channel. Each zone can be treated as if it were an independent HEOS Amp or Link, allowing for streaming of all physical and cloud-based content supported by the HEOS App. The Drive offers the same IP control of Denon and Marantz AVRs as the Link.

In addition to the high quality, 5-way binding posts, each zone of the Drive includes a pair of analog inputs and outputs, a USB port, and a 12-volt trigger output. There are also two optical and two coaxial digital inputs. All inputs are matrixed, so that any source connected to any zone of the HEOS Drive can be made available as a source for any other zone. All inputs can be named to make source navigation easier for both the integrator and end user. There is a pair of Ethernet ports, allowing for as many as eight HEOS Drives to be daisy-chained for a total of 32 zones. The Drive is supplied with removable feet and rack mount ears. In recognition of its intended application, the HEOS Drive is the only HEOS product without built-in Wi-Fi.

The HEOS Drive uses the same Class-D amplifier topology as the HEOS Amp, a product that has been widely regarded as offering the best sound quality in the category. The HEOS Drive uses the same high performance digital-to-analog converter as the HEOS Amp and Link: The Burr-Brown PCM5102A 32-bit, 384kHz DAC. Finally, the HEOS Drive includes a Dolby Digital/Digital+ decoder to allow a display or set-top-box to be connected directly using its digital output regardless of the output setting of the device. Multi-channel audio will be down-mixed into stereo.

 

Introducing the HEOS Home Cinema

As part of our ongoing commitment to expand the HEOS product lineup, we are extremely pleased to officially launch the HEOS Home Cinema. This Sound Bar/Subwoofer package is one of three new solutions that will be joining the existing HEOS ecosystem during the next two months.

This Sound Bar/Subwoofer package comes fully equipped with numerous inputs (HDMI, Coaxial, Analog, Optical and USB) and provides a best in class experience! We are officially accepting preorders and will begin shipping in July.
 

HEOS CINEMA KEY FEATURES

  • 2.1 HEOS Wireless Soundbar w/ Wireless Sub
  • 1 x HDMI Input
  • 1 x HDMI Output with ARC
  • 1 x Coaxial Digital Input
  • 1 x Optical Digital Input
  • 1 x USB Input
  • DTS Decoding
  • Wall Mount Ready
  • 1 x Analog Input
  • 1 x Ethernet Port
  • Dolby Decoding

Grandview Projector Lift

 

GPCK-ME1000 Refiner Series Projector Lift

The Grandview "Refiner" Series Projector lift delivers smooth operation with low noise level (<45dB) and holds up to 25Kg. Designed with high strength steel, this lift has a 1 meter range and the minimum installation height is just 190mm.

  • Heavy-Duty tubular motor and fireproof belt.
  • Integrated Cable Management
  • Universal panel for use with a variety of projectors
  • Adjustable Height

GPCK-ME Brochure Link

Audyssey Pro Calibration Kit

Audyssey Pro Calibration Kit

At the core of everything Audyssey creates is our first technology, MultEQ™. Based on 6 years and $6 million of research at the USC Immersive Audio Lab, MultEQ delivers accurate, enveloping, and distortion-free sound in any listening environment. It has won numerous awards and is the basis of several other Audyssey technologies. MultEQ has been established as the standard room correction technology for today's leading audio products.

Measurement
Room distortion is caused by sound reflecting from surfaces within the listening space. A patented time domain method was developed to accurately capture the negative effects of these reflections at multiple locations.
 
Clustering
The distribution of the problems caused by reflections is not uniform. Traditional averaging techniques give equal weight to each problem. Audyssey developed a new method to automatically assign greater importance to larger problems, therefore using processing resources more effectively.

Equalization
With this information, MultEQ creates equalization filters for each channel resulting in improved soundstage, accurate tonal balance and smoother bass.

Audyssey MultEQ Pro allows up to 32 calibration points (unlike the capped 8 position calibration of MultEQ XT). The Sound Equalizer is intended for the custom installer market. An Audyssey-trained installer uses the Installer Kit that comes with an individually calibrated mic (with cal file that matching it to an industry-standard ¼" B & K reference mic), calibrated preamp, USB cable, mic stand, and 72' of XLR cables. Best of all it comes in a beautiful padded carry case that can be taken on-site for MultEQ Pro installations.

Star Light Fiber Optic Ceilings

 

Star Light Fiber Optic Ceilings

Feature Presentations fiber optic Panels is the newest technology in digital star lighting. Admiring the night sky can be even more enjoyable indoors with the use of the star ceiling Panel.

Provide your clients the ultimate effect in ceiling design with star clusters, firework display and shooting stars with the convenience of clean and simple installation.

Sparkling pin points of light appear through fabric wrapped fiberglass panels. Star Panels can be customized by shape, size, quantity and patterns of of light per panels.

Unlimited selection of light patterns are available from a random spacing as in a star field to custom designs and pictures. Light can move, pulse, sequence or alternate to provide unique effects or can simply appear together. Panels may also be used in ceilings, walls for accent panels, limousines or other custom applications. Custom finishes to accent all color scenes. Custom sizes available. Special color effects can be achieved by using colored LEDs.

4x4 HDMI Matrix TV Wall Processor



 

CE Labs DVPD44 4X4 Matrix TV Wall Processor

The DVPS44 4x4 HDMI Matrix TV Wall Processor, provides the most flexible and cost effective solution in the market to route high definition video sources, plus multi-channel (up to 7.1-channel) digital audio, from any of the four HDMI sources to remote displays. Can be used as a Matrix Switch (4 Inputs/4 Outputs), or as a wall processor.

  • Allows any HDMI display to view any HDMI source at any time like a Matrix Switch or Wall Processor

  • Supports 7.1 channel digital audio

  • Supports default HDMI EDID & learns the EDID of displays

  • Can switch any output channels to any HDMI input by push-in button, IR remote control, RS-232 control, and Ethernet control

  • Easy installation with rack & wall-mounting designs

  • Fast response time for channel switch

  • Four user-selectable HDMI outputs from 640x480 to 1920x1200

  • Supports HDMI/DVI input, from 640x480 to 1920x1080@60, interlaced or progressive

  • Resize, position, zoom, rotation, fade-in, fade-out to scale output video

  • Each HDMI output has an independent controllable display

  • HDMI and HDCP compliant

  • Software control through RS-232

  • Image parameters and layouts are automatically saved in flash memory of the device and can be recalled for later use

  • Several image parameters and layouts can be saved in computers and can be loaded for later use

  • Firmware upgradable for support of new features and technology enhancements

Link to DVPS44 brochure

Low-Cost approach to Perimeter Security!
CAST LED Perimeter Lighting System

Awards
  • "Most Innovative Product of the Year" (LightFair's highest award)
  • "Best in Industrial, Emergency, Exit Category" (LightFair)
  • "Product Innovation Award" (Architectural Products)
  • "Product Innovation Award" (Architectural SSL)
  • "Security's Best Winner" (ASIS Accolades)
  • "Top 30 Technology Innovations" (Security Sales and Integration)
  • "Homeland Security - Best Perimeter Protection Finalist" (Government Security News)
CAST LED Perimeter Lighting System


"The combination of low-wattage LED's and extremely wide voltage range allow perimeter lighting runs up to 500 ft. per low-voltage wire."


Description

A low-voltage security lighting system comprised of rugged LED luminaries' and a reliable power supply. Mounted on fence posts, these lights are simple and quick to install, and consume a fraction of the energy of traditional security lighting. Can also be used in any lighting application where long wire runs are required (such as wooded paths and piers). These luminaries' have numerous applications for a variety of end users in both permanent and temporary installations.


Applications
  • Commercial and Municipal Properties to illuminate long perimeters or pathways
  • Airport Perimeters
  • Energy Providers for power plants and substations
  • Public Parks
  • Residential areas where perimeters need added security but must comply with strict dark-sky ordinances
  • Military - for permanent installations and rapid deployment settings
  • Temporary Fence Providers
  • Event Providers
  • Construction Companies to secure construction sites
  • Aid and Relief Stations
  • Law Enforcement to secure accident and crime scenes

 

Benefits

  • Low Cost
  • Simple Installation
  • Safe Low-Voltage
  • Energy-Efficient
  • Dark-Sky Compliant
  • Introductory Video

    Cast LED Perimeter Lighting System Video

    Perimeter LED Lighting

    View Cast LED Perimeter Lighting Webinar

    Installation Demonstration Video

    Outdoor Displays

    UltraViewTM & XtremeTM

    UltraViewTM

    Embrace the freedom of taking entertainment to new locations. Peerless-AV® UltraView™ TVs provide an elegant true outdoor TV solution. Instead of packaging TVs into expensive enclosures that still require openings to the outside environment, Peerless-AV® has created a new class of flat panel displays that creates a true outdoor TV. With a fully-sealed design, there are no vents, fans or filters to the outside that can expose the internal components to the elements, insects or even a spilled drink.

    XtremeTM

    There has never been an outdoor flat panel display like the Peerless-AV® Xtreme™ display. Eliminating the need for vents, filters or exhaust fans, the unique fully-sealed design provides the ultimate protection against weather, water and dust. A patented Dynamic Thermal Transfer™ system keeps internal components safely warmed in extreme cold and properly cooled in extreme heat. The unit is Compatible with all control systems via RS232 or IR. The Peerless-AV® outdoor flat panel display has the highest ratings for waterproof and dustproof in its class, making it the perfect choice for any location, indoor or out.

    Outdoor Display Brochure Link

    CAST LED Impressionist Series


     

    MULTI-PORT GIGABIT UNMANAGED SMART SWITCHED

     

    Buffalo’s BS-GU series of multi-port gigabit switches and BS-GUP series of multi-port gigabit PoE switches offer an easy and cost-effective way to extend your business network at gigabit speeds and the convenience of Power over Ethernet (BS-GUP series). Plug and play installation requires no additional software or configuration. Each auto-sensing gigabit port automatically detects and configures the correct connection while full duplex operation and optional jumbo frame support provide maximum performance.

    Buffalo’s multi-port gigabit switches include power saving features like 802.3az Green Ethernet technology and an energy conservation feature that monitors the activity status of each port to reduce the total power consumed, therefore reducing related operational costs. Gigabit speeds, eco-minded features and a lifetime warranty make Buffalo’s BS-GU and BS-GUP series of multi-port gigabit switches a perfection network extension solution for your office.

    • Lifetime warranty*
    • 5/8/16/24 gigabit Ethernet ports
    • 802.3az Green Ethernet technology
    • Automatic energy conservation feature reduces total power consumption
    • Loop prevention or detection (depending on model)
    • Auto-MDIX provides fast plug and play setup with any Ethernet cable
    • Durable metal chassis
    • Internal power supply BS-GU2008P uses external power supply
    • Fanless, compact design offers silent and reliable operation

    *Requires product registration within 30 days of purchase


    Paramount LCD Ceiling Mount

    For 15" - 37" LCD Flat Panel Screens

    Peerless Paramount Flat Panel LCD Ceiling Mount

    No wall space? No problem. This VESA® compliant LCD ceiling mount gets the TV up easily and offers an incredible range of viewing options. Installation is made simple with its one-, two-, three- design. Simply attach the ceiling plate, attach the adapter to the screen and hook-on the TV – Done.

    This LCD TV mount delivers the ultimate in positioning options with its tilt and infinite swivel options for that ultimate flat panel viewing experience.

    Product Specifications
    • Fits all 15” to 37” VESA® 75/100, 200 x 100 and 200 x 200 mm compliant LCD flat panel screens
    • Simple hook-on design allows screen to rest in place while tightening screws
    • Three adjustable extension lengths: • PC932A models: 9.8" - 13.9", PC932B models: 13.78" - 21.89", PC932C models: 20.24" - 34.02"
    • Adjustable tilt of +15/-5° with optional lock in 5° increments
    • Mountable adjustment for screen placement opportunities
    • Internal cable management allows cables to be routed through extension column
    • Includes hardware for installation to a wood joist or concrete

    Peerless PC932 Brochure Link


     

    Flat Screen Automated TV Lift System

     

    Inca Flat Screen TV Lifts

    The INCA line of flat screen Lifts, P/N 900814 and all models thereof, are specifically designed to move flat screen TVs from concealments to any desired viewing position. Inserts are included to mount a manual or automatic swivel system on the lift platform.

    Product Specifications
    • Rack and pinion construction
    • External, positive-stop, adjustable limit switches
    • VESA compliant mounting system available
    • Aluminum side panels and steel spur gears
    • Unit can lift up to 450 lbs.
    • Available in stainless steel upon request
    • Available in automatic or manual swivel (optional)
    • Touch-stop safety controller available upon request

    Control Options
    • Rocker Switch
    • RF Radio Remote
    • TV Power On Sensor
    • Dry contact closure for Touch Screen use



    Inca TV Lift Brochure Link


    SPK811 Audio Wall/Ceiling Mounts

     

    Peerless SPK811 Audio Wall/Ceiling Mount

    The universal wall and ceiling mount provides the ultimate flexibility in mounting to achieve premium sound quality. Speakers up to 20lb can be mounted to the wall or ceiling. the ball and socket design allows for multi-directional positioning.

    Product Specifications
    • Ball and socket design for multi-directional positioning
    • 75° range of adjustment in all directions
    • Speaker wires can be hidden for an aesthetically appealing installation
    • Concealed mounting screws
    • Can be assembled as a flush mount or used with a 3" extension
    • Hardware for wood studs, metal studs, concrete and drywall
    • Fastener pack contains hardware for mounting most commercially available speakers


    Peerless SPK811 Brochure Link



    Ziptape Label Dispensers & Booklets


    Ziptape Catalogue Link

    Ziptape Cable Identification System

    Dispensers

    The Ziptape Rite & Wrap IIR dispensers are a pocket-sized disposable dispenser containing a roll of pre-cut self-laminating wire markers. Each marker has a white area available for legend inscription using a pen or pencil. After marking, simply pull back on the marker liner and the marker is dispensed. On application, the transparent portion of the clear vinyl marker wraps around itself to protect the white write-on area. The adhesive is an aggressive acrylic that is resistant to oil and water, with a service temperature range of –40oF to +250oF.

    Booklets

    Ziptape Mitymark Wire Marker Booklets offer a convenient pocket-sized package of tape wire markers. Each booklet contains 10 pages of pre-cut markers 1-1/4" long, totaling 450 wire markers with 450 matching terminal markers sized 3/16" x 3/16".

    Several different booklets are available containing a combination of industry recognized numbers, letters, NEMA colors and legends. Each booklet is available in either the standard vinyl cloth material or tear resistant Tyvek material.

    Flexible Non-Metallic Raceway

     

    Resi-Gard® is Ideal for providing a main chase from the main distribution panel to a secondary hub in the attic or basement, Resi-Gard non-metallic flexible raceway is available in 3/4" to 2" diameter sizes with factory installed pull tape in sizes 1" to 2". The raceway is hand bendable, lightweight and easily installed. Bright orange color clearly signifies a low voltage installation.

    Riser-Gard® is a non-metallic flexible raceway for use in Riser and General Purpose applications. Riser-Gard is UL Listed and is available with tape pre-installed. Riser-Gard is listed to UL 2024 Standard for Riser Applications or Fiber Communications raceways.

    Plenum-Gard® is a non-metallic corrugated flexible conduit for use in Plenum, Riser and General Purpose applications. Plenum-Gard is manufactured from PVDF resin, which is extremely durable and resistant to abrasion and mechanical damage before/after cable installation.

    Want to experience Dolby ATMOS?

    Our Delta, BC demo Theater has just been outfitted with Dolby ATMOS in a 5.1.4 Configuration. Just give us a call to set up a time for you and or your client to experience completely immersive sound!

    TV Mirrors, Outdoor & Waterproof TV's 

    Grand Series

    Incorporating the latest technology into your home doesn’t mean compromising your décor. The Grand Series vanishing mirror displays provide a crisp television image and, when turned off, a fashionable mirror remains without a hint of its technological applications. You decide when a television is in the room with the simple push of a remote control button. No more unsightly and obtrusive monitors!

    An elegant centerpiece that improves your décor...The LG LED Mirror TV is the cutting edge of hidden television technology. The TVs we create have flawless 1080P quality and incredible brightness. Installation is just as easy as a regular TV, you can simply hang it on your wall and you're done! You can pick from an abundance of frame options to blend in with the rest of your room.

     

    Bathroom Series

    Beauty and technology reflected in your bathroom mirror.

    Add sophistication and elegance to your bathroom in a matter of only minutes. An ultra thin TV is built directly into the custom sized TV mirror, so you'd never guess there's a TV hidden behind it until it's turned on and the television magically appears. We are able to work provide you with nearly any size, from small mirrors to entire walls. Many sizes are in stock and can ship today! Our Bathroom Series  mirror TV couldn't be easier to install, all you have to do it hang it on your wall!

     

    Indoor/Outdoor Series

    Easily add a TV to your outdoor space with our Indoor/Outdoor Series TV's. Featuring a screen completely sealed against moisture
    and humidity. Perfect for outdoor gatherings and play!

     

    Waterproof Shower Series

    In this fast paced world of multi-tasking, we are prepared to deliver a product that will start your day off happily and efficiently—the waterproof shower TV! Watch the morning news while taking your shower to save time and stay in the know. Never again miss a second of that nail-biter of a football game due to needing a shower. You can even sing along to your favorite songs while scrubbing

    THE NEW LINE-UP LEADER WITH MONOLITHIC
    L/R SEPARATED AMP DESIGN AND BREATHTAKING DOLBY ATMOS®

     

     

    Introducing the DENON AVR-X7200W

    Welcome the new leader of the 2014-2015 Denon® AVR range. Featuring ultimate build quality with a left/right-separated monolithic amplifier design and custom made DHCT (Denon High Current Transistors), the AVR-X7200W guarantees best-in-class sound quality with minimum interferences. Thanks to built-in Wi-Fi® and Bluetooth®, it is perfectly set for all network services including Spotify Connect®, AirPlay®, Network Music Streaming and Internet Radio. Via its 8 HDMI inputs (including one on the front panel) it handles 4k 60Hz pass through playfully, and even upscales video to 1080p and 4k 60Hz.

    Now add brand new Dolby Atmos, triple HDMI outputs with multisource/multizone functionality and integrated Audyssey MultEQ XT32/Sub EQ HT/ LFC to guarantee the ideal calibration of your setup. The unique Denon Link HD function, guaranteeing the ultimate in entertainment pleasure, works in combination with AL32 Processing Multichannel and DDSC-HD32 for higher resolution audio playback.

    All sums up to the most comprehensive AVR experience we are pleased to offer.

    AVR-X7200W Brochure

    Discover the Possibilities TM

    Compass Control® represents the first fully integrated major control system built from the ground up to use Apple's iOS devices – iPad®, iPad mini®, iPhone®, and iPod touch®as its backbone.

    Compass Navigator Test Drive Video

    With the power of iOS and the Compass Control® App for the iPad®, iPad mini®,iPhone®, and iPod® touch, control for your dream system has become a reality thanks to simple swipe gestures and the simplicity of Compass Control’s beautiful graphic interface. Using Key Digital’s Compass Navigator™ software, programming a Compass Control® device is an intuitive step by step process utilizing simple ‘drag and drop’ gestures.

    Compass Control Residential
    Compass Control Commercial

    SmartMountXT by Peerless-AV

    The SmartMountXT™ series from Peerless-AV™ offers a range of versatile and easy to install mounting solutions, packed with clever features designed to enhance and simplify any professional AV installation.

    The result of listening to our customers’ needs for a complete AV wall mounting solution, the SmartMountXT line gets you closer to the wall, saves installation time and adds value to the end-user experience. This stunning line of mounts plus accessories delivers first-class features such as One-Touch™ tilt, post-installation adjustments, enhanced security options, as well as compatibility with a complete line of accessories that make setting up the perfect AV system an effortless task.

    ANYWHERE SOUNDS AMAZING

    Introducing HEOS by Denon

    The Evolution of Multi-Room Sound

    HEOS by Denon...The Evolution of Multi-Room Sound

    Launch the app, Choose the room, Pick the songs, Share the Enjoyment with Denon audio quality- beautifully designed, easy-to-use speakers— users connect with an existing home Wi-Fi network to hear what they want, wherever they want

    HEOS by Denon is a Wireless Multi-Room Sound System comprising a family of great-sounding music players for your whole home. There is a free app to control them from your iOS or Android phone or tablet. You can enjoy your favorite streaming music services, internet radio or your own music collection and set-up is a breeze.

    HEOS is a true multi-room system. You can play the same song in every room or any combination of rooms you choose, including a different song in every room. These are distinct advantages over other wireless systems such as Airplay and Bluetooth. HEOS uses standard home wireless technology so you can use your existing router without the need for any new equipment such as a bridging device. The wireless range and sound quality is far superior to Bluetooth and any device on your network running the free HEOS app can control every speaker. Only HEOS comes with 100 years of audio expertise from Denon

    HEOS by Denon Multi-Room Wireless Sound System will follow up the initial product launch introduction with pre-amp/amp expansion products. The pre-amp and amplifier products will allow for functionality of legacy audio products. The amps drive passive speaker systems and give you the ability to create additional zones of audio.

    PeerAir™ Wireless HD Multimedia System

    PeerAir Wireless Multimedia System

    SPEEDPORTTM

    The First Universal Cable Pass Thru, Fastening and Anchor System

    MIDLITE SPEEDPORT TM Universal Cable Pass Thru & Wall Anchor System

  • Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking
  • Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture

    The SPEEDPORT™ is the first universal cable pass thru, fastening and wall anchor system. The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation.

    Installation is quick and simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Low voltage brackets are no longer needed - reducing labor and a whole lot of mess from hand cutting large rectangular holes. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.

    Unmatched versatility, ease of installation and its cost/labor reducing features make the SPEEDPORT™ the ideal solution for your cable pass thru and mounting needs.
  • SPEEDPORT TM Brochure Link


     

    SD Card Security Video Intercom

    Videophone, Photo Album and Mini-DVR in one unit.

     

    KOCOM SD Card Security Video Intercom

    The KCV-A374SD provides three functions in one unit; a Videophone, a Photo Album and a Mini DVR.

    Features

    • A bright and clear Image -Thanks to leading LED Technology

    • Photo Album - Keep a history of images on the SD Card of previous callers

    • Mini DVR - Connecting CCTV camera and saves moving pictures

    • OSD & Touch-Key Applications - Convenient and easy to operate using OSD & Touch Key

    • 4 Wire Installation - Easy to install with only 4 non-polarity Wires.

    • Install in any environment - Single Family, Multi-Family or office environment.

    Kocom 2 and 4 Wire Videophone Brochure

     


     

    Full Color Cable Testing & Report Management

    Cat 3/5e/6/6a, Coax, and Telephone Cable

    Platinum Tools Cable Prowler

    Full Color Cable Testing & Report Management

    Cat 3/5e/6/6a, Coax, and Telephone Cable

    The Cable Prowler™ combines the functions of a high-end cable tester and length measurement tester, with the capability to identify link status, link capability, and PoE detection. All of this is in full color with internal memory to save, download and output results.

    • Displays length measurement for each pair in feet or meters using TDR technology

    • Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop

    • Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps

    • Link light to identify location on a hub/switch/router port

    • Tests ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses

    • Generates selectable tones on selected pins for use with tone tracers

    • Supports up to 8 testing & ID remotes for network & telephone cables

    • Supports up to 20 network & coax ID – only mapping remotes

    • View saved cable tests

    • Full color graphical wire-mapping

    • Ability to define cable name, save cable tests and print ALL results (cable testing & network testing)

    • Multilingual (English, French, Spanish)

     

    D-ILA Technology Projectors from JVC Professional

    Reference Series D-ILA Projectors by JVC Professional

    JVC video projectors are used in some of the most demanding applications, from flight simulators to medical imaging to the home theaters of Hollywood directors and devoted enthusiasts. And while there is a JVC projector engineered specifically for each application, they are all based on the same JVC technology - D-ILA.

     

    JVC Reference Series projectors are designed for custom integration and are carried by an exclusive network of custom audio/video installers who can design and build a home theater tailored to each customer's unique needs

     

    JVC Professional Literature

    The World’s First 84inch Ultra HD Signage Display

    84WS70 84" Ultra HD Signage

    Meet the 84-inch LG Ultra HD Signage, a display that fully brings more realistic image than reality. This magnificently grand screen will fill your vision and imagination, attaining new heights in picture quality.

    LG always delivers picture quality, even on an Ultra Large 84" screen. The sheer size of the screen, which is equal to four 42" displays, will give you a breathtaking viewing experience.

    LG Ultra HD presents a whole new level of picture quality, boasting a resolution four times higher than Full HD. Naturally it is incredibly vivid and crisp, even when viewed from close distances. LG Ultra HD Digital Signage will thoroughly satisfy the viewer with flawless detail, lifting the standard of visual display.

    • 84” Edge LED Large Screen

    • Super High Resolution : 3,840 x 2,160 (Ultra HD)

    • Clear & Vivid Picture (Dynamic CR : 500,000 : 1) (TBD)

    • Auto Brightness Sensor

    • Smart Energy Saving

    • External Media Player Attachable (MP700, MP500)

    • Media Player Integrated Solution (SuperSign Elite-w, Elite-w lite)

    84WS70 PowerPoint Presentation


       

     

    play invisible. play smart.

    Designed for stunning sound and ease of installation, HSi Series Custom loudspeakers expand the realm of quality sound to create an audio system that pleases even the most critical ears. In fact, these speakers perform as well as Boston’s highly regarded traditional loudspeakers. Whether you need to fill your favorite room with sound, install a whole-house audio system or design a custom home theater, Boston has high performance HSi Custom speakers that fit every application. All with the uncompromising performance you expect from Boston.

     

     

    Boston Acoustics HSi Series Custom Speakers for In-Wall/Ceiling applications

    MW Products Pre-Configured Racks

    The MWER27 is a cost-effective and fully assembled 27U enclosed rack system with integrated cooling that provides organization for multiple components. Also available in 18U & 42U models

    • Includes complete Grade 5 hardware kit
    • Ships assembled
    • Caster base provides easy placement inside closets or against walls
    • Accepts front or rear rack mounted components
    • Side panels are lockable (locks not included)
    • Split rear doors
    • Top and bottom cable routing knockouts
    • Adjustable feet level and stabilize rack without interfering with casters
    • Removable side panels for easy servicing
    • Lockable tempered-glass left- or right-hinged front door
    • Includes pre-installed cooling fans on top
    • Fully enclosed cooling system with top and bottom ventilation
    • Heavy-gauge welded steel construction
    • Standard 19" rack enclosure works with all standard 19" rack accessories
    • (5) 2U space solid blanks
    • (5) 2U space shelves [(1) 18' deep; (4)16" deep]; each supports up to 50 lbs (22.7 kg)
    • (1) 27 space rack supports up to 750 lbs (340.2 kg)